H3C Technologies H3C S12500 Series Switches - Manual (Page 18)

7
Step Command Remarks
2. Enable manual active and
standby switchover. slave switchover { disable |
enable } Optional.
Enabled by default.
3. Manually perform active and
standby switchover.
slave switchover N/A
Displaying and maintaining active and standby
switchover
Task Command Remarks
Display the switchover state of the
specified MPU (in standalone
mode)
display switchover state [ slot
slot-number ] [ | { begin | exclude
| include } regular-expression ]
Available in any view.
Display the switchover state of the
specified MPU (in IRF mode).
display switchover state [ chassis
chassis-number slot
slot-number ] [ | { begin | exclude
| include } regular-expression ]
Available in any view.