ARM Electronics CMS - Manual (Page 9)

User’s Manual
8
Type in ipconfig to get the IP Address of the local computer. Write down the
IP address on a piece of paper for later use.
After the IP address is found, setup the connected DVR(s).
First, go to
www.greenwichmeantime.com
NOTE
: The must be set or the
Setup> will not be accessible.
After entered the local time zone, the option
will be accessible. Go to
, and the following menu will be displayed.
Network Time Protocol Setup
NTP Server
Automatically Time Sync
Manually Time Sync time.nist.gov
On
No
In this example, the NTP server should be set to “192.168.7.122” which is the
IP address of the local computer. After the NTP server is set, select for
to immediately sync the time with the local computer.
The time sync can also be updated periodically. Select for
and the time will be automatically synced once an
hour.