ARM Electronics CMS - Manual (Page 34)

User’s Manual
33
6.2.6 Setup the VDS Site Manually
If users want to add a VDS site, it has to be the only site in the group. Select
as circled below. The site name will be automatically changed to
“VDS” and it cannot be renamed.
A setup window will be popped up as below. Input the IP, port, username, and
password of VDS. Then click on to test if the
connection to VDS is successful. The testing result will be displayed on the
right. Note that “()” next to site 2 of VDS means site 2 is not connected by
VDS. Users can check or uncheck in front of the sites to select whether to
display their videos. Click to confirm and save the setting.