ARM Electronics CMS - Manual (Page 77)

User’s Manual
76
Configuration Menu of a IP Camera
In the Configuration Menu window, the tab allows users to change
the Main/Sub stream type and resolution of the IP Camera. It is the same as
in the in section Setup the IP Camera Site
Manually
.
Other tabs (Property, Network, Video Setting, and System) allow users to edit
the IP Cameras’ corresponding settings. Click at the bottom and
users can see effect of the new setting from the Live view window. The
change of settings will be applied to the webpage of the IP Camera as well.
If users wish to connect to the IP Camera’s webpage via a browser, click
at the bottom. When the setting is completed, click
at the bottom to exit the Configuration Menu.
NOTE: Only A5s IP Cameras with software version “d20110323NS” or
later support the configuration function.