ARM Electronics CMS - Manual (Page 86)

User’s Manual
85
Users can setup at most 8 monitoring areas. Click on button to
delete all boxes. Alternatively, right click on any single box to delete it
individually.
Sensitivity:
Setup a desired sensitivity level.
Interval:
The time specified here is for determining the lost of objects. If an
object is removed from the selected areas for more than the time specified
here, lost of object alert will be triggered.
Enable Function: Check on it to enable missing/foreign object detection.
Show Region:
Check on it to display the detection area visually on the
monitoring screen. The boxes will also be captured and displayed on the
snapshot images.
Clear All: Click on it to clear all selected boxes.
Apply: Click on it to save and apply settings in the configuration section.
Start Simulation:
Click on it to start simulating object detection. As shown in
the previous page, green boxes will mark the lost of objects.
Stop Simulation: Click on it to stop simulation.
Live: Click on it to restore the Video Preview frame to live image.