ARM Electronics CMS - Manual (Page 105)

User’s Manual
104
NOTE:
The camera live preview window is limited up to three
instances at the same time.
Step 7. Right click on the camera preview window to display the camera
control menu. The menu items includes: Snapshot, Talk(On/Off),
Dome Setting, Dome Control, Sound Notification(On/Off), and
Camera Info.
Camera Icons
There are three different types of camera icons in E-MAP: dome camera,
fixed camera, and alert icons.
Dome Camera icon
Fixed Camera icon
Alert icon
Dome camera icon will be displayed when the selected camera is a PTZ
(pan/tilt/zoom) dome camera. Fixed Camera icon will be displayed when the
selected camera is a fixed camera. Alert icon will be displayed when an alert
is triggered to the camera on the image. The alert icon will blink to attract
attention.
Change Emap Size
Users can adjust the display size of the image on E-MAP by clicking on the
icons described as below.
: To display the original size of the image.
: To double the size of current displayed image.
: To reduce current displayed image size by one half.
: To adjust the image to fit display window (refer to figure on the right).
NOTE: If there is no image file loaded on the Emap window, an error
message will be shown when clicked on any of the four buttons above.
NOTE:
When the image is very large, or when users cannot see the
entire image in the display window on the right, click on a channel in
the site tree and the E-MAP will automatically move to the location of
the selected channel.