ARM Electronics CMS - Manual (Page 33)

User’s Manual
32
6.2.5 Setup the VSS/NVR Site Manually
When users are adding a VSS/NVR site, select as marked below.
Then enter IP address, port, username, and password of the VSS/NVR site.
The next step is to setup connection type. Users can select
or . The recording/displaying scenarios are as follows.
When is selected:
1. VSS: The recording/displaying streams will follow rules of dual streaming
option selected with predefined main/sub streams at VSS sites.
2. NVR: The recording streams will be whatever streams come in. The
displaying streams will follow rules of dual streaming option selected.
When is selected:
For both VSS and NVR sites, both recording and displaying streams will be
the sub stream. The dual streaming options will not be available.
Click to complete the setting.