Super Systems 20Q User Manual

Page 94

Gr.8Gr.8Gr.8Gr.8Gr.8

Run time group 7 [r.Gxx]

Run time group 7 [r.Gxx]
SERIAL LINK PARAMETER

- Serial interface protocol - [r.G01]

Range: OFF = No serial interface

ñbUS = Modbus
jbUS = Jbus

NOTE

NOTE: When serial interface circuit is not mounted, the middle
display will show “no.Pr”

- Serial link device address - [r.G02]

This parameter is available only when “S.L.Pr” [r.G01] is different
from "OFF".
Range: from 1 to 255

- Serial link baud rate - [r.G03]

This parameter is available only when “S.L.Pr” [r.G01] is different
from "OFF".
Range: from 600 to 19200 baud (19200 baud is shown, on
display, as 19.20)

- Serial link byte format - [r.G04]

This parameter is available only when “S.L.Pr” [r.G01] is different
from "OFF".
Range: 8

= 8 bits without parity

= 8 bits + even parity

= 8 bits + odd parity

- Group 7 default data loading - [r.G05]

Range: OFF = No loading data

ON = Loading data

Gr.7Gr.7Gr.7Gr.7Gr.7

mkc-ssi.pmd

06/07/2004, 12.19