Super Systems 20Q User Manual

Page 43

CnF. 2CnF. 2CnF. 2CnF. 2CnF. 2

- OUT 5 range - [C.E08]

This parameter will be available only when Out 5 is configured
("O5.Fn" [C.E07] different from "nonE")
Range: 0-20 = 0

20 mA

4-20 = 4

20 mA

- OUT 5 retransmission initial scale value

- [C.E09]

This parameter will be available only when Out 5 function [C.E07]
is configured as “PV.rt” or “SP.rt”
Range: From -1999 to 9999
NOTE

NOTE

NOTE: Decimal point is positioned as previously selected at

“CnF.1 - ñ.In.d” [C.d03])

- OUT 5 retransmission full scale value

- [C.E10]

This parameter will be available only when Out 5 function [C.E07]
is configured as “PV.rt” or “SP.rt”
Range: From -1999 to 9999
NOTE

NOTE

NOTE: Decimal point is positioned as previously selected at

“CnF.1 - ñ.In.d” [C.d03])

- OUT 5 filter on the retransmitted value

- [C.E11]

This parameter will be available only when OUT 5 is configured
as process variable retransmission ("O5.Fn" [C.E07] is equal to
“PV.rt”).
Range: From 0 (no filter) to 8 seconds
NOTE

NOTE

NOTE: this is a first order digital filter applied to the retransmit-
ted output value.

- OUT 6 function - [C.E12]

Range: nonE = Output not used

ñAin = Main control output (linear)
SECn = Secondary control output (linear)
PV.rt = Process variable retransmission
SP.rt = Operative set point retransmission

NOTE

NOTE: When the option circuitry is not mounted the middle
display will show “no.Pr” (not present).

mkc-ssi.pmd

06/07/2004, 12.19