Super Systems 20Q User Manual

Page 39

CnF. 1CnF. 1CnF. 1CnF. 1CnF. 1

- Auxiliary input type

- [C.d10]

This parameter will be skipped when the auxiliary input option is
not mounted or "A.In.F" (auxiliary input function [C.d09]) is equal
to "nonE".
Range: 0-20

= 0

−

20 mA

4-20

= 4

−

20 mA

0- 5

= 0

−

5 V

1- 5

= 1

−

5 V

0-10

= 0

−

10 V

2-10

= 2

−

10 V

- Initial scale read-out of the auxiliary

i n p u t

- [C.d11]

This parameter is available only when auxiliary input is configured
Range: from -1999 to 9999
NOTE

NOTE

NOTE: the decimal point will be automatically positioned as
selected for the main input.

- Full scale read-out of the auxiliary

i n p u t

- [C.d12]

This parameter is available only when auxiliary input is configured
Range: from -1999 to 9999
NOTE

NOTE

NOTE: the decimal point will be automatically positioned as
selected for the main input.

- Filter on auxiliary input - [C.d13]

This parameter is available only when auxiliary input is configured
Ranges: from 0 (no filter) to 8 seconds.
NOTE

NOTE

NOTE: this is a first order digital filter applied to the measured
value made by the auxiliary input.

- Auxiliary input activation mode -

[C.d14]

This parameter is available only when auxiliary input is configured
Range: norñ = The auxiliary input activation is controlled by

external contact, front key or serial link

Cnd.A = The auxiliary input activation is controlled by its

status (The device works with local set point
when auxiliary input is out of range, while it
works with remote set point (or bias) when it is
within range)

mkc-ssi.pmd

06/07/2004, 12.19