Super Systems 20Q User Manual

Page 81

Gr.4Gr.4Gr.4Gr.4Gr.4

Run time group 4 [r.dxx]

Run time group 4 [r.dxx]
CONTROL PARAMETERS

NOTE

NOTE: when SMART function is activated, all the parameters
calculated by SMART (Pb, Ti, Td and rCG) can not be modified.

- Proportional band - [r.d01]

This parameter is available when at least one control output is
configured.
Range: from 0.5% to 999.0% of the input span.

Set 0.0% for On/OFF control action

NOTES

NOTES:
1) The Pb resolution will be equal to 0.1% up to 10.0% and 1%

up to 999.0.

2) When device is working with SMART algorithm the “Pb” value

will be limited as selected by parameters “Pb.Hi” [r.L02] and
“Pb.Lo” [r.L01]

- Hysteresis (for ON/OFF control) -

[r.d02]

This parameter is available when Pb [r.d01]=0 (On/OFF control
action)
Range: from 0.1% to 10.0% of the input span.

- Integral time - [r.d03]

This parameter is available when at least one control output is
configured and Pb [r.d01] is different from 0.
Range: from 00.01 to 20.00 mm.ss

Above this value the display blanks and the integral
action is excluded

NOTE

NOTE: When device is working with SMART algorithm the “ti”
value will be limited as selected by “ti.Hi” [r.L04] and “ti.Lo”
[r.L03].

mkc-ssi.pmd

06/07/2004, 12.19