Super Systems 20Q User Manual

Page 46

CnF. 2CnF. 2CnF. 2CnF. 2CnF. 2

CONFIGURATION GROUP 3 [C.Fxx]

CONFIGURATION GROUP 3 [C.Fxx]
CONTROL OUTPUT CONFIGURATION

- Split range - [C.F01]

This parameter will be available only when two control outputs
are configured.
Range: dIS

= Split range feature is not required

Enb

= Split range feature is required

NOTE about the split range

NOTE about the split range.
This function allows you to drive by the same control action, two
physical outputs (two actuators) with different bias and gain.
The relation between the Calculated Power Output and the
resulting real outputs are shown below:

where:
- for the first split output (MAIN)

Bias 1 = -A
Gain 1 = 100 / (B - A)

- For the second split output (SECONDARY)

Bias 2 = -C
Gain 2 = 100 / (D - C)

FOR EXAMPLE

FOR EXAMPLE:
Let's suppose that the first split output operates from 0 % to
33.3 % of the calculated output while the second one operates
from 33.3 % to the 100 % of the calculated output.

0 %

100 %

Calculated
PWR Output

Real PWR
Output

First split
output (MAIN)

Standard curve

Second split
output
(Secondary)

CnF.3CnF.3CnF.3CnF.3CnF.3

mkc-ssi.pmd

06/07/2004, 12.19