Super Systems 20Q User Manual

Page 38

CnF. 1CnF. 1CnF. 1CnF. 1CnF. 1

Real curve

Read-out

Adjusted
curve

Input

OFSt

- Offset on the main input - [C.d07]

Ranges: from -500 to 500.
NOTE

NOTE

NOTE: the decimal point will be automatically positioned as
selected for the main input.

- Filter on the displayed value - [C.d08]

Ranges: from 0 (no filter) to 8 seconds.
NOTE

NOTE

NOTE: this is a first order digital filter applied to the read-out of
the main input.

- Auxiliary input function - [C.d09]

Range: nonE = Input not used

rSP

= Input used as remote set point input

bIAS = Input used as bias for local set point

NOTES

NOTES:
1) When auxiliary input option is not mounted the middle display

will show “no.Pr” (not present).

2) The parameter “L.r.O.ñ” [C.d16] will be forced to “n.ALG” if

“A.In.F” [C.d09]= “bIAS” and “A.I.Añ” [C.d14]= “Cnd.A”.

3) When "bIAS" is selected, the instrument uses as operative set

point the sum of the local set point with the value measured
by the auxiliary input scaled by "A.In.L" [C.D11] and "A.In.H"
[C.d12] parameters.

mkc-ssi.pmd

06/07/2004, 12.19