Super Systems 20Q User Manual

Page 52

CnF. 3CnF. 3CnF. 3CnF. 3CnF. 3

CONFIGURATION GROUP 4 [C.Gxx]

CONFIGURATION GROUP 4 [C.Gxx]
AUXILIARY CONTROL CONFIGURATION

- Smart function - [C.G01]

This parameter will be available only when at least one control
output is configured
Range: dIS

= Smart function disabled

Enb

= Smart function may be enabled

- Control action type - [C.G02]

This parameter will be available only when at least one control
output is configured
Range: Pid

= The process is controlled by PID actions

= The process is controlled by PI actions

- Manual function - [C.G03]

This parameter will be available only when at least one control
output is configured
Range: dIS

= Manual function disabled

Enb

= Manual function may be enabled

- Output value for AUTO to MAN transfer

- [C.G04]

This parameter will be available only when at least one control
output is configured and manual function is enabled (“ñAn.F”
[C.G03] = “Enb”)
Range: - from 0.0 to 100.0 % of the output span if device is

configured with only one control output

- from -100.0 to 100.0 of the output span if device is

configured with two control outputs (split range
excluded).

Above the value 100.0 the display shows “buñ.” meaning that the
transfer from AUTO to MANUAL is bumpless (the instrument set
for MANUAL mode the same power output used in AUTO mode)

CnF.4CnF.4CnF.4CnF.4CnF.4

mkc-ssi.pmd

06/07/2004, 12.19