REMKO WPM-Smart-Control-Manual for specialists-WKF-120 - Manual (Page 8)

Language / Time
Zurück 1/6 OK
Grundeinstellungen Basic settings
Back
Fig. 7: Language / Time
Selecting a parameter
Press the rotary knob until you reach the "Clock"
parameter.
The bottom bar on the display shows the number
of the current parameter and the total number of
parameters in one menu item (in this case, 2/6).
Language / Time
Time: 14 : 54
Back 2/7 Change
Fig. 8: Selecting a parameter 1
Select "Change" (right softkey). The select value
appears marked in blue.
Language / Time
Time: 14 : 54
Cancel 2/7 Next
Fig. 9: Selecting a parameter 2
Changing the parameter
Turn the rotary knob to set the number of hours.
Turning the knob to the left reduces the value, and
turning it to the right increases it.
Time: 19 : 54
Language / Time
Cancel 2/7 Next
Fig. 10: Changing the parameter
"Next" (right softkey) takes you to the menu for set-
ting the number of minutes.
Turn the rotary knob to set the number of minutes.
Confirm your entry with "OK" (right softkey).
Exiting the menu
Provided that no parameter has been selected, the
label "Back" appears on the display, over the left
softkey. Press the left softkey multiple times to get
back to the home screen.
(After a period of inactivity of 30 minutes, the con-
troller switches back to the home screen automati-
cally.)
Overview
Next view Start animation
Fig. 11: Exiting the menu
REMKO Smart WP MANAGER
8