REMKO WPM-Smart-Control-Manual for specialists-WKF-120 - Manual (Page 71)

"Settings" menu item (continued) - Expert
Authorisa-
tion level
Level 2 menu
item
Level 3 menu item Level 4 menu item Info
Heating /
cooling
Building adaptation
Building time constant
You can find
many of the indi-
vidual info texts
about the level
2-4 menu items
on your Smart
Control
Standard heating load
Inertia of the heating curve
Mode
Room climate mode
Differ. from cooling limit
Differ. from heating limit
Floor screed drying func-
tion
After the floor screed
function we recommend
this function manually to
finish by deactivating!
Floor screed fun. status
Start / end temperature
Max.temperature
Heating phase increment
Drying time
Time at high temp.
Incremental cooling phase
Time at low temp.
Cooling
Cooling cycle mode
Cooling curve adjustment
Time program
Setpoint increase
Room unit
Dewpoint monitoring
Cooling
Fixed value
Dew point distance
Temperature difference
Floor screed function
Designation Value range Factory setting Cust. system
Floor screed func. status Activated / Deactivated Deactivated
Start/end/max/temp. "10 °C-50 °C"/"20 °C-50 °C" 20 °C/35 °C
Incremental heating phase 0.0 K - 10.0 K 5.0 K
Drying time 0.0 h - 192 h 24 h
Time at high temp. 0.0 h - 192 h 96 h
Incremental cooling phase 0.0 K - 10.0 K 5.0 K
Time at low temp. 0.0 h - 192 h 24 h
71