Remko smart wp manager – REMKO WPM-Smart-Control-Manual for specialists-WKF-120 User Manual
Page 48

Acquisition of the stored energy via the S 09
probe
If heating is to be provided from the available solar
yield (if required), this parameter must be acti-
vated.
If another heat generator is connected to the
system hydraulically, e.g. water-based chimney
heat exchanger, this parameter must be activated
and the S 09 probe must be installed.
Fig. 86: Acquisition of the stored energy
Menu item
Parameter
Factory setting
Acquisition
of the stored
energy
Deactivated
Deactivated
Activated
REMKO recommends installing a domestic hot
water mixer.
Once the last parameter has been entered into the
commissioning wizard, the screen switches to the
overview mode (3D house).
REMKO Smart WP MANAGER
48