REMKO WPM-Smart-Control-Manual for specialists-WKF-120 - Manual (Page 79)

"Chimney sweep" menu item - Expert
Authorisa-
tion level
Level 2 menu item Level 3 menu item Info
Mode Normal operation / test mode You can find
many of the indi-
vidual info texts
about the level
2-3 menu items
on your Smart
Control
Hot water valve Deactivated / activated
Running time 15 - 90 minutes
Fig. 101: Level "Expert" - chimney sweep function
In order to test boilers or wall heaters with bivalent
systems it is possible to manually enable the
second heat generator in the "user and expert
level".
The test mode can be changed from "normal
mode" to "test mode". During testing it is possible
to activate the changeover valve to the hot water
tank, in order to feed the heat generated to the hot
water tank. This function is limited to 30 minutes
with the factory settings. The restriction can be set
from 15 to 90 minutes. Once the run-time has
lapsed, normal heat pump mode becomes active
automatically.
Fig. 102: "Normal operation" mode
Fig. 103: "Test mode"
79