Measurement Computing Micro 488/EX rev.2.1 - Manual (Page 54)

Section 4 General Programming
4.12
4.4.4 Logging MACRO Data
The Micro488/EX includes a non-volatile LOG buffer. Data generated
during MACRO execution can be forced to this buffer rather than the serial
output buffer. Type the following…
LOG ON
DOMACRO 2
HELLO
After a period of approximately 10 seconds the Micro488/EX will respond
with…
Micro488/EX Revision 1.0 Copyright (C) 1988 IOtech
Inc.
Notice that the output from MACRO 2 which was previously displayed did
not appear. This data went into the LOG buffer. Type the following…
LOG MEMORY
The Micro488/EX will respond with the number of bytes in the LOG buffer
of…
54
Now type…
READ LOG
The Micro488/EX will respond data in the LOG buffer of…
3
12:00:00 PM
2
12:00:05 PM
1
12:00:10 PM
12:00:10 PM