Measurement Computing Micro 488/EX rev.2.1 - Manual (Page 162)

Section 5 Command Descriptions
5.92
WAIT
The WAIT command informs the Micro488/EX to WAIT until a specified day,
date or time before continuing additional command executions. If DATE, DAY or TIME
is not specified with the WAIT command, TIME is assumed.
SYNTAX WAIT [TIME] [;] hh:mm [:ss ] [ AM | PM ]
hh specifies hours in 24 hour format unless AM or PM is included
mm specifies minutes
ss specifies seconds, set to 00 if omitted
or
WAIT DATE [;] {date}
If a European format has been selected, the WAIT DATE command
requires the date specifier to be in the same order.
American date Example
MM/DD/YY 12/04/76
MM-DD-YY 12-04-76
MM/DD/YYYY 12/04/1976
MM-DD-YYYY 12-04-1976
MON DD YYYY DEC 04 1976
MON DD, YYYY DEC 04, 1976
MONTH DD YYYY DECEMBER 4 1976
MONTH DD, YYYY DECEMBER 4, 1976
European date Example
DD/MM/YY 04/12/76
DD-MM-YY 04-12-76
DD/MM/YYYY 04/12/1976
DD-MM-YYYY 04-12-1976
DD MON YYYY 04 DEC 1976
DD MONTH YYYY 4 DECEMBER 1976
or