Measurement Computing Micro 488/EX rev.2.1 - Manual (Page 11)

Section 1 Introduction
1.3a
&$87,21
Please read this manual carefully! If equipment is used in any
manner not specified in this manual, the protection provided by
the equipment may be impaired.
1.3 Specifications
IEEE 488
&$87,21
The IEEE 488 terminal must only be used to control a non-
isolated IEEE 488 system. The common mode voltage (cable
shell to earth) must be zero.
Terminal Installation Category:
O
Standard: Not Applicable.
O
CE: Category 1.
Implementation:
O
C1, C2, C3, C4 and C28 controller subsets. SH1, AH1, T6, TE0, L4, LE0,
SR1, RL0, PP0, DC1, DT1, E1
Terminators:
O
Selectable CR, LF, LF-CR, and CR-LF with EOI.
Connector:
O
Standard IEEE 488 connector with metric studs.
Serial Interface
&$87,21
The RS-232/RS-422 terminal is only for connecting devices
having signals at serial communication levels.
Terminal Installation Category:
O
Standard: Not Applicable.
O
CE: Category 1.
EIA RS-232C:
O
AB, BA, BB, CA, CB.