Measurement Computing Micro 488/EX rev.2.1 - Manual (Page 13)

Section 1 Introduction
1.3c
Weight:
O 1.55 kg (3.6 lbs.).
Operating Environment:
O Standard: Indoor use, 0 to 50 o
C; 0
O CE: Indoor use at altitudes below
to 70% RH to 35
o
C. Linearly derate 2000 m, 0 to 40
o
C; 80% maximum
3% RH/
o
C from 35 to 50
o
C. RH up to 31
o
C decreasing linearly
4% RH/
o
C to 40
o
C.
Data Buffer:
O Approximately 29000 characters total, dynamically allocated and non-volatile.
Data maintained for up to 10 years typical.
Controls:
O Power Switch (external), IEEE and Serial parameter switches (internal).
Jumper selection of RS-232 or RS-422 operation (internal)
Indicators:
O LED indicators for TALK, LISTEN, SRQ, ERROR and POWER.
Power:
O An external power supply is provided with the Micro488/EX: Input is 105 to
125 VAC or 210 to 250 VAC; 50-60 Hz, 10 VA maximum. External power
supply 9 VDC output is to be connected to the Micro488/EX power input marked
10 VDC MAX @ 600 mA.
&$87,21
Do not connect AC power line directly to the Micro488/EX.
Otherwise, equipment may be damaged.
:$51,1*
Do not use this interface outdoors! The interface is intended for
indoor use only! Outdoor conditions could result in equipment
failure, bodily injury or death!