Measurement Computing Micro 488/EX rev.2.1 - Manual (Page 135)

Section 5 Command Descriptions
5.65
REMOTE
The REMOTE command asserts the Remote Enable (REN) bus management line.
If the optional bus addresses are specified, then REMOTE also addresses those devices
to listen, placing them in the Remote addressed state.
SYNTAX REMOTE
or
REM
RESPONSE None
MODE SC
BUS STATES REN
EXAMPLES PRINT #1,"REMOTE"
Assert Remote Enable
SYNTAX REMOTE addr[,addr…]
or
REM addr[,addr…]
addr is a bus device address
RESPONSE None
MODE SC•CA
BUS STATES REN, ATN•UNL, MTA, LAG
PRINT #1,"REMOTE16,28"
Assert Remote Enable and address devices 16 and 28
to listen.