Measurement Computing Micro 488/EX rev.2.1 User Manual
Micro 488/ex user’s manual
the smart approach to instrumentation ™
IOtech, Inc.
25971 Cannon Road Cleveland, OH 44146
Phone: (440) 439-4091 Fax: (440) 439-4093
E-mail:
Micro 488/EX User’s Manual
Stand Alone Bus Controller
p/n Micro488/EX-901, Rev 2.1
©1992 by IOtech, Inc. Part No.Micro488/EX-901
Printed in the United States of America
Table of contents
Document Outline
- Micro488/EX User's Manual
- Warranty Information
- Warnings, Cautions, Notes, and Tips
- Table of Contents
- 1-Introduction
- 2-Getting Started
- 3-IEEE Operating Modes
- 4-General Programming
- 5-Command Descriptions
- 6-Controller Pass-Thru Operation
- 7-Peripheral Pass-Thru Operation
- 8-IEEE 488 Primer
- 8.1 History
- 8.2 General Structure
- 8.3 Send It To My Address
- 8.4 Bus Management Lines
- 8.5 Handshake Lines
- 8.6 Data Lines
- 8.7 Multiline Commands
- 8.7.1 Go To Local
- 8.7.2 Listen Address Group
- 8.7.3 Unlisten
- 8.7.4 Talk Address Group
- 8.7.5 Untalk
- 8.7.6 Local Lockout
- 8.7.7 Device Clear
- 8.7.8 Selected Device Clear
- 8.7.9 Serial Poll Disable
- 8.7.10 Serial Poll Enable
- 8.7.11 Group Execute Trigger
- 8.7.12 Take Control
- 8.7.13 Secondary Command Group
- 8.7.14 Parallel Poll Configure
- 8.7.15 Parallel Poll Unconfigure
- 8.8 More on Service Requests
- 9-Service Information
- Appendix A-Micro488/EX Command Summary
- Appendix B-Micro488/EX Error Messages
- Appendix C-Character Codes And IEEE Multiline Messages
- Appendix D-Sample Terminal Programs