Trace – Measurement Computing Micro 488/EX rev.2.1 User Manual

Page 160

Text mode
Original mode

Section 5

Command Descriptions

5.90

TRACE

The TRACE ON command allows the embedded macro commands within the

macro buffer to be echoed out the serial port to the host computer as the Macro is
executed. This allows trace debugging during Macro execution. This feature is disabled
with the TRACE OFF command.

If tracing is enabled during LOG ON, the trace output will also go to the LOG

buffer.

SYNTAX

TRACE{ON

|OFF}

RESPONSE

Echoes macro commands during macro execution

MODE Any

BUS STATES

None

EXAMPLES

PRINT#1,"TRACE ON"

Enable Tracing

PRINT#1,"DOMACRO 0"

Execute and trace macro #0