Measurement Computing Micro 488/EX rev.2.1 - Manual (Page 48)

Section 4 General Programming
4.6
4.3.3 Day of Week
While running one of the TERMINAL programs in Appendix D, type
the following on the PC's keyboard…
SET DAY MONDAY
DAY
The Micro488/EX will respond with…
MONDAY
Now type the following to change the DAY output to a numeric format.
DAY FORMAT D
DAY
The Micro488/EX will respond with…
2
For more information, refer to the following DAY related commands.
SET DAY
DAY
DAY FORMAT
WAIT
4.3.4 Combinations
The DATE, DAY and TIME commands may be sent within a single
command line in any order, as long as each command appears only once.
Type the following on the PC's keyboard…
DAY FORMAT DAY
DATE FORMAT MONTH DD, YYYY
TIME FORMAT HH:MM:SS AM
DAY DATE TIME
The Micro488/EX will respond with…
MONDAY JULY 4, 1988 1:05:00 PM