Measurement Computing Micro 488/EX rev.2.1 - Manual (Page 53)

Section 4 General Programming
4.11
4.4.3 Debugging a MACRO
The TRACE ON command allows the embedded macro commands
within the macro buffer to be echoed out the serial port to the host computer
as the Macro is executed. This allows trace debugging during Macro
execution. This feature is disabled with the TRACE OFF command.
Type…
TRACE ON
DOMACRO 2
The Micro488/EX will respond with…
SET TIME 12:00 PM
DOMACRO 1,3,5
COUNT
3
TIME
12:00:00
ENDM01
< 5 Second Delay>
COUNT
2
TIME
12:00:05
ENDM01
< 5 Second Delay>
COUNT
1
TIME
12:00:10
ENDM01
TIME
12:00:10
ENDM02
Type the following to disable the TRACE feature…
TRACE OFF