Measurement Computing Micro 488/EX rev.2.1 - Manual (Page 139)

Section 5 Command Descriptions
5.69
SAVE
The SAVE command is used to clear NVRAM ERROR conditions after a FACTORY
command and to SAVE user specified DATE FORMAT, DAY FORMAT, TIME FORMAT
and CASE defaults to NVRAM.
SYNTAX SAVE
RESPONSE None
MODE Any
BUS STATES None
EXAMPLE PRINT#1,"FACTORY"
FOR N = 1 to 10000 : NEXT N
PRINT#1,"DATE FORMAT MM-DD-YY"
PRINT#1,"TIME FORMAT HH:MM:SS"
PRINT#1,"DAY FORMAT DAY"
PRINT#1,"CASE LOWER"
PRINT#1,"SAVE"