Measurement Computing Micro 488/EX rev.2.1 - Manual (Page 105)

Section 5 Command Descriptions
5.35
ERASE LOG
The ERASE LOG command empties the non-volatile LOG buffer of any data that it
contained. The memory occupied by the LOG buffer is returned to the USER heap.
SYNTAX ERASE LOG
RESPONSE None
MODE Any
BUS STATES None
EXAMPLES PRINT#1,"MACRO 1" Define a macro
PRINT#1,"HELLO"
PRINT#1,"ENDM"
PRINT#1,"LOG ON"
Enable logging
PRINT#1,"DOMACRO 1" Execute the macro
The response is logged
PRINT#1,"LOG MEMORY"
INPUT #1,L
Read the memory used
PRINT L Printed to the screen
54 Number of bytes in buffer
PRINT#1,"ERASE LOG" Erase the log buffer
PRINT#1,"LOG MEMORY"
INPUT #1,L
Read the memory used
PRINT L Printed to the screen
0 0 bytes in buffer