IHSE USA 474 Series Draco major - Manual (Page 89)

Configuration
2011-10-11 89
5.5 Console Settings
5.5.1 Console Ports (CON Ports)
The name, type, OSD view and the currently related CPU port for every
single console are shown and can be configured in this menu.
You have the following possibilities to access the menu:
If you want to configure the console ports, you will have to consider the
following notes for a correct selection of the port types:
 Single-Head ports and USB 2.0 ports can be switched individually.
 Dual-Head ports, Quad-Head ports and also Single-Head/USB 2.0
ports are always switched together.
 Only odd ports (#01, 03, 05, etc.) can be configured as Dual-Head
ports or Single-Head/USB 2.0 ports.
 Only every fourth port (#01, 05, 09, etc.) can be configured as Quad-
Head port or Triple-Head/USB 2.0 port.
 Respectively, only the first CON port can be still switched by 'Hot
Keys'. The other ports behave like 'slaves'.
 If you switch to differently configured CPU ports, one or more
monitors can remain dark.
 If a user switches from a Quad-Head console to a Single-Head CPU
port, the other three monitors will remain dark.
 If a user switches from a Quad-Head console to a Dual-Head CPU
port, two of the four monitors will remain dark.
 If a user switches from a '1U' console to a Single-Head CPU port
followed by a '0U' CPU port, the USB port will remain active
If a user switches from a 1U console to a Single-Head CPU port followed
by a 0U CPU port, the USB port will remain active.
The reconfiguration of a CPU or CON port between DVI/KVM and
USB 2.0 funktionality requires a backup of the new configuration by the
option Save and and can only be activated by a subsequent restart of the
Draco major.