IHSE USA 474 Series Draco major - Manual (Page 75)

Configuration
2011-10-11 75
Field Selection Description
Y
(Yes) After opening the OSD, the user attains
to the mask KVM List. This list only
contains the CPU ports available at this
console (default).
KVM Listview
N
(No) Function not active. After opening the
OSD, the user attains to the extended
switching mask KVM-Switch.
Y
(Yes) After switching of the CPU port in the
masks KVM-List or KVM-Switch, OSD
will be automatically left and the
connection to the new CPU will be
displayed (default).
KVM Auto
Close
N
(No) Function not active
Y
(Yes) After pressing any key a KVM
connection to the first available CPU will
be established.
Note:
The option Auto Connect is only
functional, if there is no active
connection to a CPU yet.
Auto Connect
N
(No) Function not active (default)
CON Timeout
Minutes Period of inactivity until the connection
of the own console to the connected
CPU will be automatically disconnected
(default: 0 minutes).
Y
(Yes) Activate request of keyboard control
between two consoles.
Keyboard
Connect
N
(No) Function not active (default)
Y
(Yes) Activate request of mouse control
between two consoles.
Mouse
Connect
N
(No) Function not active (default)
Release Time
Seconds Period of inactivity of a connected
console until keyboard and mouse
control can be requested for further
consoles that are connected to the
same CPU (default: 10 seconds)
Note:
Set value '0' for a delay less
transfer in real-time. Only one console
can have keyboard and mouse control
at the same time. The other consoles
that are connected to the same CPU
have a video only status.