IHSE USA 474 Series Draco major - Manual (Page 79)

Configuration
2011-10-11 79
5.3.4 Network
You can configure the network parameters in this menu.
You have the following possibilities to access the menu:
You can select between the following settings:
Field Selection Description
Y
(Yes) Selection whether network settings are
supplied automatically
DHCP
N
(No) Function not active (default)
IP Address
Byte Input of the IP address in the form
'192.168.1.1' in combination with an
operation without DHCP
Subnet Mask
Byte Input of the subnet mask in the form
'255.255.255.0' in combination with an
operation without DHCP
Gateway Byte Input of the subnet mask in the form
'192.168.1.1' in combination with an
operation without DHCP.
Only modify the network parameters in consultation with your system
administrator. Otherwise unexpected results and failures can occur in
combination with the network.