IHSE USA 474 Series Draco major - Manual (Page 100)

Draco major
100 2011-10-11
5.5.5 Macro Keys
The programming of the macro commands for switching can be done in
this menu.
You have the following possibilities to access the menu.
The macros are separately deposited for each console. For the use of the
macros, you need a macro keyboard from the range of accessories that is
connected to one of the USB-HID ports of the appropriate CON unit.
Alternatively, the execution of the macros can also be done by 'Hot Key'
and the function keys –.
If keyboard, mouse and a macro keyboard should be used at the same
time, you will have to use an extender with four USB-HID ports or an USB
hub.
You can select between the following settings:
Field Selection Description
Connect P1 to P2
Set bidirectional connection from
console P1 to CPU P2
Connect Video
P1 to P2
Set video connection from console P1
to CPU P2
Disconnect
Disconnect console P1
Open P1
Open configuration file P1
Save
Save current configuration to the matrix
Save As P1
Save current configuration into
configuration file no. P1
Function
(01–08)
Logout
Logout current user
P1
1-16 Number of the console that has to be
connected to a CPU
Number of the configuration file
(default: 0).
P2
1-32 Number of the CPU that has to be
connected to the console