Draco major 68 – IHSE USA 474 Series Draco major User Manual
Page 68

Draco major
68
2011-10-11
Field
Selection
Description
Y
(Yes)
Save the current configuration of the
matrix in the flash memory periodically.
Auto Save
N
(No)
Function not active (default)
Y
(Yes)
Send echoes of all switching commands
done by the matrix.
Enable
COM Echo
N
(No)
Function not active (default)
Y
(Yes)
Reject commands via external interfaces
(RJ45, RS232) during OSD is open.
Lock
COM Ports
N
(No)
Function not active (default)
Baud rate
kBaud
Numerical
value
Select a predefined Baud rate for the
serial control (default: 115.2 kBaud).
Y
(Yes)
Synchronize the slave matrix according
to the settings of the master matrix.
Slave Matrix
N
(No)
Function not active (default)
Master IP
Address
Numerical
value
Set the network address of the master
matrix (default: 0.0.0.0).