IHSE USA 474 Series Draco major - Manual (Page 122)

Draco major
122 2011-10-11
6.1.3 Addressing of Main and Sub Matrix
The Draco major system can be cascaded in two steps. You can
optionally send the commands (including opening the OSD) to the main
level or the sub matrix.
Whenever command mode is activated, you can select by a or a ,
if all of the following commands should be handled in the main or in the
sub matrix.
OSD Access
 OSD access in the main matrix:
, , (optional),
 OSD access in the sub matrix
, , ,
Example: Switching to the CPU port 23 of the sub matrix.
 Switching to the CPU Port (e.g. 12) of the main matrix that have the
connection to the sub matrix:
, , , <1>, <2>,
 Switching to the CPU Port 23 of the sub matrix:
, , , <2>, <3>,
The selected main matrix/sub matrix mode is permanently activated until
the other mode will be manually activated. This means that if you select
for example, all prospective commands will be sent to the sub matrix,
also if the Command Mode is left in the meantime.