Guralp Systems CMG-CD24 User Manual
Page 99
Operator's Guide
7.3.1.4 Sensor input
This is a standard 26-pin “mil-spec” plug,
conforming to MIL-DTL-26482 (formerly
MIL-C-26482). A typical part-number is
02E-16-26P although the initial “02E” varies
with manufacturer.
Suitable mating connectors have part-
numbers like ***-16-26S and are available
from Amphenol, ITT Cannon and other
manufacturers.
Pin Function
Pin Function
A Vertical velocity +ve
P Calibration signal
B Vertical velocity –ve
R Vertical calibration enable
C N/S velocity +ve
S N/S calibration enable
D N/S velocity –ve
T E/W calibration enable
E E/W velocity +ve
U Centre
F E/W velocity –ve
V not connected
G Vertical mass position
W Unlock
H not connected
X Lock
J
N/S mass position
Y Logic signal ground
K Busy indicator LED
Z not connected
L E/W mass position
a not connected
M Power Optional -12VDC
b Power 0 V
N Signal ground
c Power +10 to +24 V(Optional
+12VDC)
Wiring details for the compatible socket,
***-16-26S, as seen from the cable end (i.e.
when assembling).
March 2011
99