Guralp Systems CMG-CD24 - Manual (Page 17)

Operator's Guide
connect several CD24s to the same PC and configure them all at
the same time.
3. For Wireless Networking configure your wireless router or
access point to use a network name (SSID) of LTRX_IBSS.
Disable any security features of the wireless router or access
point.
4. DHCP will not work through routers or across the Internet. All
the devices need to be on the same network segment as the PC.
5. Monitor the DHCP server to find out what IP address it gives to
each digitiser.
6. To configure a device, enter its IP address into a web browser.
2.3.3 Configuration with the web interface
Once you have access to the Wi-Port's Web interface, you can
configure it with its proper settings.
1. The Web page is divided into three. A menu on the left
switches between the pages of configuration options on the
right. There is also a banner at the top, which tells you the
current firmware revision and the MAC address.
2. To navigate around the Web site, click on the entries in the left-
hand menu. When you have made changes to the settings on
any page, save them by clicking OK before you leave the page.
Once you have made all the changes click on Apply Settings to
configure the digitiser.
2.3.3.1 Wireless Settings
1. Click on WLAN (Wireless Local Area Network) to open the
WLAN Settings page.
March 2011 17