Guralp Systems CMG-CD24 User Manual

Page 18

CMG-CD24

2. Change the Network Name (i.e. SSID) from LTRX_IBSS to a

suitable name for your installation. This name will be

announced to any nearby wireless devices when they search for
networks.

3. If you are using an ad-hoc network, change the second Network

Name box as well. Otherwise, deselect Ad Hoc Network
Creation.

4. Under Wireless Network Security, set Security to WEP and

configure the security parameters. If you do not do this, anyone
will be able to access the CD24 and change its configuration.

5. Make a note of the security parameters you have used.

6. Click OK, followed by Apply Settings in the main menu. The

Wi-Port will restart.

7. If you are setting up an infrastructure network, configure your

wireless access point or router to use the new name and
security settings, and power cycle the CD24 to make it

reconnect to the network.

8. Reconnect your computer to the wireless network using the new

name and security settings.

2.3.3.2 Configuring the serial channels

1. The Wi-Port has two serial channels to which you can connect.

By default, these are exposed on ports 10001 and 10002.

2. Channel 1 (normally port 10001) is connected to a serial console

(which is also exposed on the power port of the breakout box).
If you have problems connecting to the CD24, you can attach a

Issue C