Guralp Systems CMG-CD24 User Manual
Page 16
CMG-CD24
15. Double-click on the entry which corresponds to the CD24 you
want to configure. The right-hand panel will change to show
the current properties of the device.
16. Switch to the Web Configuration tab and click Go to open the
Web configuration interface.
17. You can also click Use External Browser to use your own Web
browser to configure the system.
18. Follow the steps at 2.3.3 to configure the module from its Web
interface.
2.3.2 Using DHCP
If you cannot install DeviceInstaller on your PC, or you do not wish to,
you can also get access to the CD24 using a standard DHCP server. In
most cases you will need to have administrative privileges to do this.
1. Install and start the DHCP service on your PC.
2. For Ethernet networking connect the CD24's ETHERNET port to
the the PC's network interface, either using a crossover Ethernet
cable or through a network hub. Note that using a hub, you can
16
Issue C