Guralp Systems CMG-CD24 User Manual
Page 24
CMG-CD24
2. Right-click in the white panel beneath Server, and select Add
TCP Server....
3. Input the IP address of the CD24, followed by a colon and then
the output port 10002. For example:
192.168.33.2:10002
Click OK.
4. After a short wait, an entry for the digitiser should appear in the
pane. Right-click on the entry and select Connect.
5. If the connection is successful, you should see blocks appearing
in the Block Rx pane and streams will appear in Scream!'s main
window. Close the Network Control window.
24
Issue C