Guralp Systems CMG-CD24 - Manual (Page 61)

Operator's Guide
The value at each of the eight hex code positions is the total of the
values of the required components, expressed in hexadecimal. For
example:
In the above example the following data outputs are activated:
N and E from Sensor B at Tap 3
No outputs from Sensor B at Tap 2
X channel from Sensor B at Tap 1
Z, N and E from Sensor B at Tap 0
Z and N from Sensor A at Tap 0
Further examples:
To set the N component at Tap 2 of Instrument A, the hex code would
be:
0002,0000
To set the all 3 components at Tap 3 of Instrument B, the hex code
would be:
0000,7000
The Hex Code for the Mux channels is configured in much the same
way:
ABCD
A = M0 to M3
B = M4 to M7
March 2011 61