Guralp Systems CMG-CD24 - Manual (Page 14)

CMG-CD24
2. DeviceInstaller also requires the Microsoft .NET framework to
be installed. If you do not have this already, it can be
downloaded at www.microsoft.com .
Note: DeviceInstaller will not work through routers or across
the Internet. All the devices need to be on the same network
segment as the PC.
3. Find out the MAC address of the CD24's network interface.
This should be printed on a label on the case.
4. If the Data Out port on the breakout box is connected to
anything, disconnect it.
5. For Ethernet networking, connect the CD24's ETHERNET port to
the the PC's network interface either using a crossover Ethernet
cable or through a network hub. Note that using a hub, you can
connect several CD24s to the same PC and configure them all at
the same time.
6. For Wireless Networking configure your wireless router or
access point to use a network name (SSID) of LTRX_IBSS.
Disable any security features of the wireless router or access
point.
7. Run DeviceInstaller.
8. DeviceInstaller's main window has two panels, a tree on the left
(with Lantronix Devices at the top) and a table on the right.
9. The program will automatically look for Lantronix devices on
all of your computer's network interfaces. If necessary, you can
narrow the selection by clicking on an entry in the tree on the
left. If the program does not list the device, press F5 or use
Device > Search from the menu system.
14 Issue C
NOTE: Any connection to the Data Out port on the
breakout box will disable networking