Guralp Systems CMG-CD24 - Manual (Page 23)

Operator's Guide
4. Select the Recording tab and check both Auto Record—Enable
for Data Streams and Auto Record—Enable for Status Streams.
Click OK.
Scream! will remember the recording options you set in steps 3
and 4 for later occasions.
5. Select File Read SCSI disk... → from the main menu. Scream!
will search for attached disks, and open a window with a list of
all the streams it has found.
6. Select the streams you want to replay, and click Open. The disk
will appear in the left-hand pane of Scream!'s main window,
and the streams you have selected will start playing into the
stream buffer, as well as being recorded.
7. When you have finished transferring the data, if you want to
reset the disk, select File Reset SCSI disk... → from Scream!'s
main menu. Select the disk you want to reset, and click OK.
2.6 Receiving data in Scream!
There are several ways a CD24 digitiser can be connected to Scream!:
•
A direct serial connection can be made from the breakout box to
your computer. This is the method we recommend for testing
the digitiser (see section 2.2 on page 10).
•
The serial port can also be used to connect an external modem.
Details of how to connect modems are available on the Güralp
Systems Web site.
•
Data can be received from the digitiser over the optional
Ethernet or wireless links. Before you can do this, you will
need to set up its IP address and network configuration, as
described in section 2.3 on page 13.
To connect to a CD24 over the network:
1. Run Scream!, and select Windows – Network Control from the
main menu. Click on the My Client tab.
March 2011 23