Guralp Systems CMG-CD24 User Manual
Page 72
CMG-CD24
The DOWNLOAD command returns immediately, so that you can issue
more commands if required. To close the connection and begin
downloading, issue the GO command.
You can pause a download by entering terminal mode, and restart with
another GO or abort with END-DOWNLOAD.
When you complete a DOWNLOAD without specifying a time period, the
CD24 marks the latest position with an internal read pointer, which
can be used as a start point for the next DOWNLOAD with the command
ALL-TIMES (see below.)
5.8.3 ALL-FLASH
Syntax: ALL-FLASH
Moves the read pointer to the oldest data held by the CD24, and sets
up the DOWNLOAD to transfer all data since then. When it has finished,
the read pointer will be at the end of the downloaded data.
This command does not alter which streams are to be transmitted; you
should also specify streams or use the ALL-DATA command.
When you issue ALL-FLASH, the old position of the read pointer is
forgotten. Issuing ALL-TIMES will not restore it.
72
Issue C