Gasboy 1000 Series FMS Startup Manual User Manual

Page 48

Start-Up Commands

03/07/03

11-5

10. For Card or Cardless systems only, type LK to load the 4-digit PIN key that is assigned to

your system at the time of order. This is used in calculating PIN numbers.

HGÂ
Â
REPÂGAaÂPQÂ !%

↵

Â
Â

NOTE: The value shown is for example only. Use the PIN key assigned to your system. If

you have a card system, the PIN key is listed on the card layout sheet attached to
the Card Encoding Manual; cardless systems list the PIN key on the Field
Information Form.

11. For FleetKey systems only, type WK to load the 4-digit working key that is assigned to your

system at the time of order. This is used in calculating PIN numbers.

YGÂ
Â
YQTGEPCÂGAaÂPQÂ !%

↵

Â
Â

NOTE: The value shown is for example only. Use the working key assigned to your system.

The working key is listed on the key layout sheet provided with your system.

12. Type

SD to load the start and end times for site shut down. If you disabled the Auto Site Shut

Down feature through the SC command, you can skip this step.

U@Â
Â
UEVAÂUDWVÂ@QYPÂUV7TVÂVEIA0Â
DQWTU0ÂÂ"#

↵

IEPU0ÂÂ

↵

Â
UEVAÂUDWVÂ@QYPÂAP@ÂVEIA0Â
DQWTU0ÂÂ'

↵

IEPU0ÂÂ

↵

Â
Â