Dynex DX-G1113 - Manual (Page 78)

78 Legal notices
Connecting the wiring
To connect the wiring:
1 Locate the factory wiring harness in the dash. We recommend using the correct
mating adaptor and making connections as shown. (Isolate and individually tape off
the ends of any unused wires to prevent an electrical short circuit).
2 Re-connect the battery terminal and test the unit for correct operation. Mount the
head unit/kit assembly to the sub-dash with those screws previously removed.
Legal notices
© 2006 Dynex. DYNEX and the DYNEX logo are trademarks of Best Buy Enterprise Services,
Inc. Other brands and product names are trademarks or registered trademarks of their
respective holders. Specifications and features are subject to change without notice or
obligation.
1
2
4
3
1–Strip wire ends back ½”
2–Twist ends together
3–Solder
4–Tape
DX-G1113.fm Page 78 Wednesday, August 16, 2006 3:38 PM