Dynex DX-G1113 - Manual (Page 58)

58 Installing your car stereo
Oldsmobile
Cutlass Supreme 1984-1988
To install your car stereo:
1 Disconnect the negative battery terminal to prevent an accidental short circuit.
2 Remove the cigarette lighter and radio knobs, then unsnap the radio trim bezel.
3 Remove the one screw from the right side of the ashtray housing.
4 Remove the hardware that secures the factory mounting brackets to the factory head
unit. Remove and retain the brackets.
5 Go to “Completing the installation” on page 76.
2
S10 shown
as example
DX-G1113.fm Page 58 Wednesday, August 16, 2006 3:38 PM