Dynex DX-G1113 - Manual (Page 20)

20 Installing your car stereo
Cadillac
Deville 1985-1995
Cadillac
Fleetwood 1985-1993
To install your car stereo:
1 Disconnect the negative battery terminal to prevent an accidental short circuit.
2 Remove the two screws at the top of the radio trim bezel.
3 Pull out on the top edge of the bezel, then pull up to remove it.
4 Remove the hardware that secures the factory mounting brackets to the factory head
unit. Remove and retain the brackets.
5 Go to “Completing the installation” on page 76.
2
S10 shown
as example
DX-G1113.fm Page 20 Wednesday, August 16, 2006 3:38 PM