Dynex DX-G1113 - Manual (Page 68)

68 Installing your car stereo
Pontiac
Grand Am 1996-1998
To install your car stereo:
1 Disconnect the negative battery terminal to prevent an accidental short circuit.
2 Remove the two Phillips screws above the instrument cluster.
3 Unclip the dash trim bezel, then remove it.
4 Remove the three 7 mm hex-head screws that secure the factory head unit, then
disconnect the wiring.
5 Locate bracket set 9.
6 Go to “Completing the installation” on page 76.
DX-G1113.fm Page 68 Wednesday, August 16, 2006 3:38 PM