Dynex DX-G1113 - Manual (Page 11)

Installing your car stereo 11
Buick
Reatta 1990-1991
To install your car stereo:
1 Disconnect the negative battery terminal to prevent an accidental short circuit.
2 Remove the two torx-head screws above the instrument panel.
3 Remove one torx-head screw from each A/C vent.
4 Unclip the dash trim bezel, then remove it.
5 Remove the hardware that secures the factory mounting brackets to the factory head
unit. Remove and retain the brackets.
6 Go to “Completing the installation” on page 76.
2
S10 shown
as example
DX-G1113.fm Page 11 Wednesday, August 16, 2006 3:38 PM